CryoScience E-Arctic Performance Electric Whole Body Cryotherapy Chamber image_1

CryoScience E-Arctic Performance Whole Body Cryotherapy Chamber
Picture for Reference - our unit is unassembled and has never been installed. This is what the chamber looks like when assembled - from manufacturer.

CryoScience E-Arctic Performance Electric Whole Body Cryotherapy Chamber image_2

Machinery
This Machinery sits near the chamber and is on wheels. The Machinery processes the refrigerant and is hooked to glycol and cold water plumbing to produce the required temperatures.

CryoScience E-Arctic Performance Electric Whole Body Cryotherapy Chamber image_3

Miscellanious Parts
Rubber Host clamps, grommets, fittins, sealants and adhesive for final installation are included.

CryoScience E-Arctic Performance Electric Whole Body Cryotherapy Chamber image_4

Copper tubing for installation
Please note that there is a dent (as seen on the left) in the tubing that will need repaired or replaced, depending on the length that you need for installation. This is the 3/4" line.

CryoScience E-Arctic Performance Electric Whole Body Cryotherapy Chamber image_5

Copper Tubing for final installation
Undamaged, medical-grade copper tubing required for final installation. 1/2"

CryoScience E-Arctic Performance Electric Whole Body Cryotherapy Chamber image_6

Miscellanious Installation Parts
Provided by manufacturer for installation.

CryoScience E-Arctic Performance Electric Whole Body Cryotherapy Chamber image_7

Control Half of Chamber
This is one of two pieces that make up the chamber. This portion has the electronics/operations of the equipment.

CryoScience E-Arctic Performance Electric Whole Body Cryotherapy Chamber image_8

Machinery Wrapped
This is how the machinery was wrapped. We removed the wrapping at the time of accepting the delivery to ensure there was not any visible damage and there were several items attached to the top (various components). We needed to verify for the purpose of receiving. It has since been re-wrapped.

CryoScience E-Arctic Performance Electric Whole Body Cryotherapy Chamber image_9

Door
The door is separate from the guest entry and will need to be attached during installation. This has not been unwrapped.

CryoScience E-Arctic Performance Electric Whole Body Cryotherapy Chamber image_10

Chamber - Main
This the other half of the chamber that bolts together with the control module. This is the actual chamber portion where the client goes during a session.

-/10

Active

CryoScience E-Arctic Performance Electric Whole Body Cryotherapy Chamber

$ 90 000

Overview:

A brand-new CryoScience E-Arctic Performance electric whole-body cryotherapy chamber is available for immediate purchase in the United States. This unit has never been installed, never been commissioned, and has never been placed into service. This is an opportunity for a buyer to obtain an electric cryotherapy chamber without waiting for overseas production, shipping timelines or worrying about outrageous Tariffs.

This offering may be especially attractive to multi-location wellness organizations, recovery centers, med spa groups, sports performance facilities, luxury wellness operators, or other organizations seeking an electric alternative to liquid nitrogen-based cryotherapy.

Installation requirements, pre-installation chceklist, and physical requirements available and will need to be sourced and verified by the buyer. Available to send PDFs.

This is a rare opportunity to acquire an immediately available electric cryotherapy chamber already located in the U.S.

Key highlights:

Brand new
Never installed
Never used
Located in the U.S.
Available immediately
Electric whole-body cryotherapy chamber
Avoids overseas manufacturing and shipping delays
Ideal for buyer seeking faster deployment

Equipment & Parts Included:

CryoScience E-Arctic electric cryotherapy chamber (2 pieces)
Chamber Door
CryoScience “Machinery” Unit SN: 0100024
Preinstallation Check-List
Original related materials and components currently in our possession Six 6.5′ K Flex ST
- insulation tubes for ½” line
- Six 6.5′ K Flex ST insulation tubes for ½” line
- (3) Large Rubber Hose Clamps
- (3 ) Small Rubber Hose Clamps
- (4) Brass / Copper Fittings for final connections
- KFlex Sealing Tape
- 1 Can of brush-on Adhesive
- (3) large foam seal/grommet
- (3) smaller foam seal/grommet
- ¾” x 0.8mm Copper HME tectube_cips_med
- HME 10 x 1mm copper TecTube_cips_med

Condition:

The unit is in unused, uninstalled condition. It has not been commissioned or placed into operation. It is being offered in its present condition as a new, never-deployed unit.

Additional equipment available:
A CryoScience Penguin unit may also be available separately or as part of a package transaction.

Logistics:
Buyer to coordinate or approve shipping logistics. Crating, freight, and transfer details can be discussed with qualified buyers.